Details

---

HRC11 1-3kVA Rack Online UPS (220V/230V/240V)

The HRC11 1-3kVA Rack Online UPS is designed to convert alternating current (AC) mains power into a pure sine wave output, ensuring stable and clean electricity supply. In the event of a mains failure, the internal battery backup system takes over to maintain uninterrupted power to connected devices. This model is ideal for use in small server rooms and IT environments.

Key Features

• High Output Power Factor
  Enhanced load handling capability with excellent adaptability to various load types, including half-wave, inductive, and capacitive loads.

• Superior Input Performance
  Achieves an input power factor of 0.99, with input harmonic current less than 3% and an overall system efficiency of up to 95.5%—delivering both energy savings and high operational efficiency.

• Advanced Battery Management
  Features a fully digital control charger with intelligent 3-stage battery charging. Charging current is adjustable via the front panel, ranging from 1A to 12A.

• Event Recording & Analysis
  Integrated event log system captures internal anomalies. Data can be exported to a PC and visualized as waveform diagrams for convenient troubleshooting and performance review.

• Versatile Communication Interfaces
  Comes standard with RS232. Optional interfaces include USB, RS485, SNMP, EPO, AS400, BMS, battery temperature sensor, and network port surge protection—ensuring broad compatibility with various systems.

Specifications

	HR1101CL	HR1101CS	HR1102CL	HR1102CS	HR1103CL	HR1103CS
Power	1kVA/1kW		2kVA/2kW		3KVA	3KVA
Battery Cold Start	Standard
Input voltage range	110VAC~300VAC
	50% load@ 276VA~C300VAC;100% load@176VAC~276VAC;110VAC~176VAC load decrease linearly from 100%~50%
Phase	Single Phase in, Single Phase out
Rated voltage	220/230/240VAC
Line low transfer	110VAC
Line low recovery	120VAC
Line high transfer	300VAC
Line high recovery	290VAC
Input curent
Rated Current	4.9A		9.7A		14.5A
Input Power Factor	≥0.99
THDi	<3% (100% Linear load); <5% (non-linear load)
Input frequency Range	50/60±5Hz,±1Hz/±3Hz/±10Hz(Settable)
Output
Frequency adaptable	Settable
Output Voltage
Waveform(Bat. Mode)	Pure Sine Wave
Rated voltage	220/230/240VAC, 200/208VAC(PF=0.9)
Voltage regulation	± 1%
Dynamic response	≤5% (0% - 100% -0%)
Dynamic recovery	≤40ms (0% - 100% -0%)
Voltage distortion	<3% (100% Linear load); <5% (non-linear load)
Output Frequency
Synchronization range	Mains mode: follow the mains frequency,Battery mode: 50/60Hz±0.1%
Transfer Time
Line mode to battery mode	0
Inverter to bypass	2ms
Effciency
Line mode with fully charged battery	94.5%@100% load		95%@100% load		95.5%@100% load
ECO mode	98.0%		98.0%		98.0%
Battery mode	89.5%@100% load		91.5%@100% load		91.5%@100% load
Noise (1m away)	<43dB@<60%load, <47dB@>60%load		<50dB@<60%load, <55dB@>60%load		<50dB@<60%load, <55dB@>60%load
Overload Capability (Inverter)	102%~110%: Transfer to bypass after 30mins 110%~125%: Transfer to bypass after 10mins 125%~150%: Transfer to bypass after 30s
Overload Capability (Battery Mode)	102%~110%: Transfer to bypass after 1min 110%~125%: Transfer to bypass after 10s 125%~150%: Shutdown after 5s
Overload Capability (Bypass Mode)	<130%: Long time operation 130%~150%: Shutdown after10mins 150%~180%: Shutdown after 5s
Crest Factor	3:1
BATTERY
Rating/Type	Depend on the capacity of external batteries	12VDC/7Ah	Depend on the capacity of external batteries	12VDC/7Ah	Depend on the capacity of external batteries	12VDC/9Ah
Quantity		3		6		6
DC Voltage	36VDC/48VDC (Support lithium battery)	36VDC	72VDC/96VDC (Support lithium battery)	72VDC	96VDC (Support lithium battery)	72VDC
Back-up Time	Depend on the capacity of external batteries	3mins @80% load	Depend on the capacity of external batteries	3mins @80% load	Depend on the capacity of external batteries	3mins @80% load
Battery Charger
Charging Voltage
Charging Current	1-12A (Settable)	1A	1-12A (Settable)	1A	1-12A (Settable)	1A
Charging Time	Depend on the capacity of external batteries	8h recharge to 90%	Depend on the capacity of external batteries	8h recharge to 90%	Depend on the capacity of external batteries	8h recharge to 90%
INDICATOR & ALARM
Display	LED+LCD
Battery Discharge	Sound once every 2 minutes
Low Battery Voltage	Sound once every 6s
Overload	Continuous beeping
Input Voltage Abnormal (Include Sequential Negative，Ground wire not connected)	Sound once every 2 minutes
Alarm	Sound once every 6s
Fault	Continuous beeping
INTERFACE
RS232	Support background software through standard cables
Input	IEC C14		IEC C20
Output	4 National standard sockets
OPTION
SNMP Card	Monitor the machine through the network
AS400 Dry Contact	Pluggable DB9 dry connector card or phoenix terminal
USB	B-type USB port
RS485	RS485 communication interface
EPO	Emergency power off
External Battery Temperature	External battery temperature detection
RJ45 Surge Protection	Port Surge Protection
BMS	Dry contact for Lithium Battery BMS
MECHANICAL
W*D*H(mm)	440*377*86	440*427*86	440*427*86	440*577*86	440*427*86	440*577*86
W*D*H(mm) (Package size)	580*515*250	580*565*250	580*565*250	580*717*250	580*565*250	580*717*250
Net weight (KG)	5.5	12.8	7	21.9	7.3	24.9
Gross weight (KG)	8.2	15.7	9.9	25.2	10.2	28.2
Color	Black
Batery Box (VRLA) Dimension	440*426*86